Unlock Usb Drive. You should plug the usb flash drive or external hard drive into the computer. Launch the command prompt as administrator, type the command diskpart and press enter.
There are more than one ways in which the usb drives are disabled by administrators at offices or colleges or schools. If the switch is in the lock side, just move it to the unlocked position. When you turn on bitlocker for an os drive, you can choose to unlock the drive at startup with a password, usb flash drive, pin (with tpm ), or automatically unlock.
3 Methods To Unlock Your Usb Drive Method 1:
Check the left or right edge to find out the switch. The location of a switch on a usb flash drive will be different. If you chose to unlock the os drive with a password, pin, or usb flash drive and forgot or lost them, then you can still unlock the os drive with its bitlocker recovery key.
Then Echo No Lsusb Command Found.
\n exit 56 fi while : If you forget the password, please click [ enter recovery key] to continue. If this method can't solve the write.
C) Click On “Repair Your Computer” From The Lower Left Corner.
To unlock the usb drive and access to all your files, enter your pin and click on unlock button. A) boot the computer from the usb recovery drive. Enable bitlocker encryption, and windows will automatically unlock your drive each time you start your computer using the tpm built into most modern computers.
When You Turn On Bitlocker For An Os Drive, You Can Choose To Unlock The Drive At Startup With A Password, Usb Flash Drive, Pin (With Tpm ), Or Automatically Unlock.
Many usb drive and sd cards have a physical lock switch which can turn on and turn off write protection. Unlock write protection by using cmd. Type bootrec /fixmbr and press enter.
When Doing It, The Drive Size Will Help You.
But you can set up any usb flash drive as a “startup key” that must be present at boot before your computer can decrypt its drive and start windows. If the switch is in the lock side, just move it to the unlocked position. Step 3 scroll down the list of keys until you find hkey_local_machine\system\currentcontrolset\services\usbstor step 4 change the start value from 4 to 3. this will make the usb flash drive ready to be used once again.
