Tp Link Tl Wdr3600 Dd Wrt. I find it easier using a 3 wire direct usb to ttl. I've bricked my tp link wdr3600.
The configure file of old firmware cannot be used in this firmware. Can confirm 5g led is not lit although 5g band is ok in early testing. Save $15 off by visiting flashrouters.com.
Sun Feb 03, 2013 0:19 Post Subject:
Why would i do this? So you will need serial port connection for sure. Save $15 off by visiting flashrouters.com.
I Keep Away From Their Products After Discovering The Extent They Go To, To Prevent Access.
Can confirm 5g led is not lit although 5g band is ok in early testing. I've searched the site and can't seem to find a guide. Please upgrade to a version 4 or higher browser so that you can use this setup tool.
I Find It Easier Using A 3 Wire Direct Usb To Ttl.
Hook up your computer to an ethernet port on the wdr3600. V1.x firmware webflash for first installation. I've bricked my tp link wdr3600.
From There, Upgraded To Gargoyle.
1, change your pc/laptop ip address to 192.168.0.66 2, connect you computer to one of the lan ports on the router (wan port won't work for this) 2, setup a tftp server on your machine (i use solarwinds tftp server) 3, put the desired firmware in your tftp folder and rename it to wdr3600v1_tp_recovery.bin 4, start the tftp server After it reboots, renew your dhcp lease (openwrt uses a different subnet by default) and telnet 192.168.1.1. Unfortunately the file would not load with a message indicating to select a file.
Then I Read About The Locked/Signed Firmware Problem.
The configure file of old firmware cannot be used in this firmware.
